Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A couple of questions
12-20-2007, 10:10 PM,
#1
A couple of questions
OK so now that I've got Crusader running on DOSBox 0.72 I've got a couple of questions. Well first I'll say that I'm surprised how smooth and trouble free the process was!!! Now, some of my questions just may be me forgetting how things were 15 years ago, anyways...
- what's with the graphics? I remember them being better. Is there something I have to change somewhere?
- for some reason it appears that my mouse movements only work horizontally and not vertically. So when I'm aiming somewhere, I can't change my aim vertically. Granted that those bullseye thingies help, but is that's how it's supposed to be? I've no idea how I've killed some of the guards just by shooting any old where.  Big Grin

That's it for now. I'm sure other things will come up in the future.

On a different note I'm also playing F.E.A.R. currently. Reminded me of Crusader for some reason.
Reply
12-21-2007, 10:25 AM,
#2
Re: A couple of questions
I might be misunderstanding you, but you can't aim vertically in Crusader. If a guard is on a higher level, and you aim in that direction (horizontally), the Silencer will automatically adjust his aim higher.
You can have my gun when you pry it from my paranoid, mentally disturbed, physically-abusive, cold, dead hand.<br />- Bumper sticker
Reply
12-21-2007, 11:40 AM,
#3
Re: A couple of questions
Yes and No Regret had smoother "graphics" than No Remorse. Dont know which one you play.

However the graphics are the same but all new wall textures and sprites seem to be a bit higher res or whatever at least thats what I thought the last time I played No Regret  Tongue
Reply
12-21-2007, 02:19 PM,
#4
Re: A couple of questions
I'd hate to play Crusader with a mouse, it'd be waaaay too tough!
"First let me say welcome to the Resistance, Captain."
Reply
12-21-2007, 05:53 PM,
#5
Re: A couple of questions
Thanks all. I'll try playing keyboard only. Didn't think about that.
Reply
01-02-2008, 02:13 PM,
#6
Re: A couple of questions
About graphic quality, the output setting in DosBox plays a great part. Screen resolution also matters. Correct(or optimized) combination really depends on your graphic adapter and respective driver. Some will look a little blur, while some other too sharp. For me, the simplest way is surface output,  resolution 640x480. By the way, Crusaders do not look good on a D-Sub connected 19" wide LCD monitor. DVI rules.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)